Факултет техничких наука у Чачку

Curriculum Vitae

 

OSNOVNI BIOGRAFSKI PODACI

Rođen je 28. 12. 1973. godine u Arilju. Osnovnu školu i Gimnaziju završio je u Arilju. Diplomirao je na Mašinskom fakultetu u Beogradu 1999. godine. Poslediplomske magistarske studije završio je 2006. godine, a doktorsku disertaciju pod nazivom „Sinteza mehatroničkog sistema za izradu specijalno oblikovanih žičanih profila ” odbranio je 2013. godine na Fakultetu tehničkih nauka u Čačku Univerziteta u Kragujevcu.

Po završetku fakulteta, od 1999. - 2000. godine radio je u AD “Proleter” Arilje, u službama tehničke pripreme mašinskog i bravarskog pogona. Od 2000. godine radi na Tehničkom fakultetu u Čačku. U svom dugogodišnjem radnom iskustvu sarađivao je sa više različitih proizvodnih preduzeća, na raznim inženjerskm poslovima, a najviše na poslovima konstruisanja, projektovanja i izrade alata na CNC mašinama.

ISTRAZIVACKA DELATNOST

U okviru rada na Fakultetu učestvovao je u realizaciji više projekata tehnološkog razvoja finansirana od strane Ministarstvo za nauku i tehnološki razvoj Republike Srbije, kao i mnogih projekata saradnje sa privredom. Tokom predhodnog perioda, objavio je preko 80 naučno-stručnih radova koji su publikovani u zemlji i inostranstvu. Autor je dva fakultetska udžbenika i više tehničkih rešenja.

 

PUBLIKACIJE

Milićević, I., Popović, M., Dučić, N., Vujičić, V., Stepanić, P., Marinković, D., Ćojbašić, Ž.: Improving the Mechanical Characteristics of the 3D Printing Objects Using Hybrid Machine Learning Approach, Facta Universitatis, Series: Mechanical Engineering, ISSN 0354-2025, Online First, (2022). DOI: 10.22190/FUME220429036M [M21a]

Savić, B., Urošević, V., Ivković, N., Milićević, I., Popović, M., Gubeljak, N., Šiniković, G.: Implementation of a Non-Linear Regression Model in Rolling Bearing Diagnostics, Tehnički vjesnik / Technical Gazette, ISSN 1330-3651, Vol. 29/No. 1 (2022), pp. 314-321. https://doi.org/10.17559/TV-20201231113711 [M23]

Ivan Milićević, Milica Spasojević, Radomir Slavković, Miroslav Spasojević, Aleksa Maričić:  Effect of the degree of plastic deformation on the thermal electromotive force of Cu-X5CrNi1810 steel thermocouple, Science of Sintering, Vol.50, No4 (2018), pp. 421-432. doi: https://doi.org/10.2298/SOS1804421M. [M22]

Milićević, I., Popović, M., Dučić, N., Slavković, R., Dragićević, S., Maričić, A.: Experimental Identification of the Degree of Deformation of a Wire Subjected to Bending, Science of Sintering, Vol.50, No2 (2018), pp 183-191. doi: https://doi.org/10.2298/SOS1802183M [M22]

Dučić, N., Milićević, I., Ćojbašić, Ž., Manasijević S., Radiša R., Slavković R., Božić M.: Intelligent system for automatic control of the process of filling the mold, International Journal of Advanced Manufacturing Technology, ISSN 0268-3768, Vol. 90, Issue 5–8 (2017), pp 2223–2231. doi: https://doi.org/10.1007/s00170-016-9552-x [M22]

Dučić, N., Ćojbašić, Ž., Manasijević, S., Radiša, R., Slavković, R., Milićević, I.: Optimization of the Gating System for Sand Casting Using Genetic Algorithm, International Journal of Metalcasting, ISSN 1939-5981, Vol. 11, Issue 2 (2017), pp 255–265. doi: https://doi.org/10.1007/s40962-016-0040-8 [M23]

Slavković, R., Veg, A., Dučić, N., Slavković, N., Baralić, J., Milićević, I.: Rigid Body Dynamics in Optimization of the Machine Tool Vibroisolation, Technical Gazette, ISSN 1330-3651, Vol.22, No1 (2015), pp 87-94. doi: https://doi.org/10.17559/TV-20130918225023 [M23]

Dučić, N., Ćojbašić, Ž., Radiša, R., Slavković, R., Milićević, I.: CAD/CAM design and the genetic optimization of feeders for sand casting process, Facta Universitatis Series: Mechanical Engineering, ISSN 0354-2025, Vol. 14, No 2 (2016), pp. 147-158. doi: https://doi.org/10.22190/FUME1602147D [M24]

Vujičić, V., Bošković, G., Čepić, S., Dučić, N., Milićević, I.: Simulation of a Chess Game with an Industrial Robot, 10^th International Scientific Conference, Technics, Informatics, and Education – TIE 2024,  Proceedings TIE 2024, ISBN: 978-86-7776-276-6, pp. 336-339, University of Kragujevac, Faculty of Technical Sciences Čačak, 20-22 September 2024, Čačak, Serbia.

Dučić, N., Dragović, G., Milićević, I., Vujičić, V.: Modeling and Simulation of CNC Feed System Using MATLAB/Simulink Software Package, 10^th International Scientific Conference, Technics, Informatics, and Education – TIE 2024,  Proceedings TIE 2024, ISBN: 978-86-7776-276-6, pp. 257-260, University of Kragujevac, Faculty of Technical Sciences Čačak, 20-22 September 2024, Čačak, Serbia.

Vujičić, V., Mijajlović, M., Milićević, I., Dučić, N.: Mechanical analysis and simulation of ABB IRB 120 robot operation using Matlab, 3^rd International Conference on Advances in Science and Technology COAST 2024, Proceedings COAST 2024, ISBN 978-9940-611-08-8, pp. 206-213, 29 May - 01 June, 2024, Herceg Novi, Montenegro.

Milićević, I., Vujičić, V., Marjanović, M., Dučić, N., Popović, M.: Application of Virtual Models in the Design of a Robotic Gripper, 2^nd International Conference on Advances in Science and Technology COAST 2023, Proceedings COAST 2023, ISBN 978-9940-611-06-4, pp. 159-167, 31 May - 03 June, 2023, Herceg Novi, Montenegro.

Milićević, I., Dragićević, S., Dučić, N., Marjanović, M., Vujičić, V.:  Improvement of study programs for bachelor's and master's studies in Mechatronics in response to the requirements of Industry 4.0, 9^th International Scientific Conference, Technics and Informatics in Education – TIE 2022,  Proceedings TIE 2022, ISBN: 978-86-7776-262-9, pp. 213-219, University of Kragujevac, Faculty of Technical Sciences Čačak, 16-18^th September 2022, Čačak, Serbia.

Vujičić, V., Marjanović, M., Milićević, I.: Commissioning of ABB Collaborative Robot, 1^st International Conference „Conference on Advances in Science and Technology“ COAST 2022, Proceedings COAST 2022, ISBN 978-9940-611-04-0, pp. 86-95, May 26-29, 2022, Herceg Novi, Montenegro.

Dragićević, S., Marjanović, M, Milićević, I., Vujičić, V.: A Study on the Effects of Constructive Parameters on the Performance of Photovoltaic Power Plant, 1^st International Conference „Conference on Advances in Science and Technology“ COAST 2022, Proceedings COAST 2022, ISBN 978-9940-611-04-0, pp. 205-212, May 26-29, 2022, Herceg Novi, Montenegro.

Jovanović, J., Živanović, B., Jovičić, A., Dučić, N., Milićević, I., Popović, M.: The elimination of the anti-coincidence colorimetry in the process of painting the shell of a vehicle by applying WCM, Engineering Today, Vol.1, No.3, (2022), pp.17-29. DOI: 10.5937/engtoday2203017J

Milićević, I., Marjanović, M., Vujičić, V., Dragićević, S., Dučić, N., Aleksić, V.: Design and Computer Simulation of Automatically Controlled Hydromechanical System for Looped Wedge Wire Screen Elements Fabrication, IMK-14 – Research & Development in Heavy Machinery, ISSN 0354-6829, Vol.27, No.4, (2021), EN 149-155. DOI: 10.5937/IMK2104141D

Jovičić, A., Dučić, N., Milićević, I., Radiša, R., Manasijević, S.:  Testing of the Caterpillar Track Parts E-650 for the Primary Mining Industry, 38th International Conference on Production Engineering of Serbia - ICPE-S 2021,  Proceedings ICPE-S 2021, ISBN: 978-86-7776-252-0, pp. 212-216, University of Kragujevac, Faculty of Technical Science Čačak, 14-15^th October 2021, Čačak, Serbia.

Marjanović, M., Vujičić, V., Dragićević, S., Milićević, I., Kovač, D.:  Modeling and Simulation of Hydraulic Systems in Simscape Fluids, 38th International Conference on Production Engineering of Serbia - ICPE-S 2021,  Proceedings ICPE-S 2021, ISBN: 978-86-7776-252-0, pp. 299-304, University of Kragujevac, Faculty of Technical Science Čačak, 14-15^th October 2021, Čačak, Serbia.

Vujičić, V., Milićević, I., Marjanović, M., Dučić, N., Jovičić, A., Dragićević, S.:  Offline Robot Programming Using ABB RobotStudio, X International Scientific Conference Heavy Machinery HM 2021,  Proceedings HM 2021, ISBN: 978-86-81412-09-1, pp. C79-C83, University of Kragujevac, Faculty of Mechanical and Civil Engineering Kraljevo, 23-25^th June 2021, Vrnjačka Banja, Serbia.

Jovičić, A., Dučić, N., Radiša, R., Milićević, I., Popović, M., Vujičić, V.:  Improvement of casting technology of continuous tracks segment using CAD/CAE/CAM software tools, X International Scientific Conference Heavy Machinery HM 2021,  Proceedings HM 2021, ISBN: 978-86-81412-09-1, pp. A39-A43, University of Kragujevac, Faculty of Mechanical and Civil Engineering Kraljevo, 23-25^th June 2021, Vrnjačka Banja, Serbia.

Vujičić, V., Dragićević, S., Marjanović, M., Ocokoljić, D., Popović, M., Milićević, I.: Laboratory Electro-Pneumatic Motion Control Setup, IMK-14 – Research & Development in Heavy Machinery, ISSN 0354-6829, Vol.26, No.3, (2020), EN75-80. DOI: 10.5937/IMK2003075V

Vujičić, V., Dragićević, S., Ocokoljić, D., Milićević, I., Popović, M.:  Design and Simulation of Electro-Pneumatic Motion Control System, 8^th International Scientific Conference, Technics and Informatics in Education – TIE 2020,  Proceedings TIE 2020, ISBN: 978-86-7776-247-6, pp. 354-358, University of Kragujevac, Faculty of Technical Sciences Čačak, 18-20^th September 2020, Čačak, Serbia.

Popović, M., Milićević, I., Marković, G., Marjanović, M., Vujičić, V.:  Load Analysis for the Design of Cutting Teeth for Bucket Chain Excavators, 8^th International Scientific Conference, Technics and Informatics in Education – TIE 2020,  Proceedings TIE 2020, ISBN: 978-86-7776-247-6, pp. 372-381, University of Kragujevac, Faculty of Technical Sciences Čačak, 18-20^th September 2020, Čačak, Serbia. 

Dučić N., Marjanović M., Dragićević S., Vujičić V., Milićević I., Popović M., Development of Intelligent System for Forecasting Natural Gas Consumption in the District Heating System, Proceedings of 19th Symposium on Thermal Science and Engineering of Serbia, ISBN 978-86-6055-124-7, pp. 836-842, October 22-25, 2019, Sokobanja, Serbia.

Popović, M., Milićević, I., Marković, G., Dragićević, S., Marjanović, M., Redesign of the bucket of bucket chain excavator ERS1000/20 using of modular design approach, 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems - IRMES 2019, pp 40-41, ISBN 978‐86‐6335‐061‐8, September 5-7, 2019, Kragujevac, Serbia.

Vujičić, V., Milićević, I.,  Dragićević, S., Marjanović, M.: Realization of Model of Robotic Arm S-430iF for Education Purposes, 7^th International Scientific Conference, Technics and Informatics in Education – TIE 2018,  Proceedings TIE 2018, ISBN: 978-86-7776-226-1, pp. 358-361,  Faculty of Technical Sciences Čačak, 25-27^th May 2018, Čačak, Serbia.

Marjanović, M., Dragićević, S., Milićević, I., Popović, M., Vujičić, V.:  Application of Computer Simulation in Engineering Education, 7^th International Scientific Conference, Technics and Informatics in Education – TIE 2018,  Proceedings TIE 2018, ISBN: 978-86-7776-226-1, pp. 362-366,  Faculty of Technical Sciences Čačak, 25-27^th May 2018, Čačak, Serbia.

Popović, M., Milićević, I., Dučić, N., An Integrated Process for the Production of Abrasive Cutting Elements for Excavators in the Mining Industry, IMK-14 – Research & Development in Heavy Machinery, ISSN 0354-6829, Vol.24, No.2, (2018), EN37-43

Milićević, I., Božić, M., Vujičić, V., Slavković, R., Jugović, Z.: Machine for Impact Testing of Plastic Pipes - IMPACT 2000 Design, Development and Prototyping, IX International Conference Heavy Machinery - HM 2017, Proceedings, ISBN 978-86-82631-89-7, pp. G.1-G.6, University of Kragujevac, Faculty of Mechanical and Civil Engineering Kraljevo, 28 June - 1 July 2017, Zlatibor, Serbia.

Popović, M., Milićević, I., Dučić, N.: Methodology of modular cutting teeth design for bucket chain excavator, IMK-14 – Research & Development in Heavy Machinery, ISSN 0354-6829, Vol.23, No.2 (2017), EN69-74.

Milićević, I., Vujičić, V., Slavković, R., Dučić, N., Popović, M.: Kinematic and Dynamic Analysis and Simulation of Complex Mechanisms Using the MATLAB Software, IMK-14 – Research & Development in Heavy Machinery, ISSN 0354-6829, Vol.21, No4 (2015), EN99-106.

Slavković, R., Milićević, I., Dučić, N., Popović, M., Jugović, Z.: Identification of supporting elements dynamics of production machines using dynamics of rigid bodies system, VIII International Conference Heavy Machinery HM 2014, Proceedings, ISBN 978-86-82631-74-3, pp. B.1-B.6, University of Kragujevac, Faculty of Mechanical and Civil Engineering Kraljevo, 25-28 June, 2014, Zlatibor, Serbia.

Milićević, I., Savković, S., Šekarić, M., Slavković, R., Dučić, N., Popović, M.: The use of virtual models in the design of mechanisms, VIII International Conference Heavy Machinery - HM 2014, Proceedings, ISBN 978-86-82631-74-3, pp. E.29-E.34, University of Kragujevac, Faculty of Mechanical and Civil Engineering Kraljevo, 25-28 June, 2014, Zlatibor, Serbia.

Milićević, I., Slavković, R., Mandić, V., Jugović, Z., Popović, M.: Virtual Models Application for the Analysis of Strain-Deformation States in the Process of Metals Processing by Plastic Deformation, IMK-14 – Research & Development in Heavy Machinery, ISSN 0354-6829, Vol.19, No3 (2013), EN 89-96.

 

PROJEKTI:

Razvoj tehnologije izrade reznih elemenata mlinova (rifajnera) u industriji papira i celuloze, Nosilac projekta: Tehnički fakultet Čačak, Projekat iz programa Tehnološkog razvoja, MIS 3.03.0140.B, 2002-2004.

Istraživanje i razvoj novih generacija zuba kašike rotornih bagera i bagera vedričara, Projekat Ministarstva za nauku i tehnološki razvoj, Broj projekta TR14038, Oblast: Mašinstvo, 2008-2010.

Razvoj nove konstrukcije kašike bagera kontinualnog dejstva u cilju integrisanja modularnih reznih elemenata, Projekat Ministarstva za nauku i tehnološki razvoj, Broj projekta TR35037, Oblast: Mašinstvo, 2010-2015.

Istraživanje i razvoj novih koncepcija veze okretne i neokretne konstrukcije mašina transportne i građevinske mehanizacije, Projekat Ministarstva za nauku i tehnološki razvoj, Broj projekta TR35038, Oblast: Mašinstvo, 2010-2015.

Projektovanje i izrada mašine za ispitivanje cevi na udar, projekat saradnje sa privredom realizovan za „Peštan d.o.o.“ Aranđelovac, evidencioni br. ugovora 824/2, od 21.04.2016. god., Fakultet tehničkih nauka u Čačku, 2016, rukovodilac projekta.

Unapređenje studijskih programa osnovnih i master studija Mehatronika kao odgovor na zahteve Industrije 4.0, projekat finansiran od strane Ministarstva prosvete, nauke i tehnološkog razvoja RS u okviru programske aktivnosti „Razvoj visokog obrazovanja“, 2020-21, rukovodilac projekta.

Projektovanje i izrada mašine za ispitivanje cevi na udar, projekat saradnje sa privredom realizovan za „Peštan d.o.o.“ Aranđelovac, evidencioni br. ugovora 410, od 11.02.2021. god., Fakultet tehničkih nauka u Čačku, 2021, rukovodilac projekta.  (http://www.ftn.kg.ac.rs/vest-643)

Projektovanje i izrada mašine za ispitivanje plastičnih cevi FCNT metodom, projekat saradnje sa privredom realizovan za „Akvapan inženjering d.o.o.“ Čačak, evidencioni br. ugovora 569, od 25.03.2024. god., Fakultet tehničkih nauka u Čačku, 2024, rukovodilac projekta.

 

 

TEHNIČKA REŠENJA:

Slavković, R., Milićević, I., Industrijski prototip modularnih elastičnih oslonaca za fundiranje tehnološke opreme, ezultat projekta Ministarstva za nauku i tehnološki razvoj, "Implementacija automatizovanog projektovanja obradnih sistema i procesa u industriji prerade metala", Tehnički fakultet, Čačak, 2010.

Jugović, Z., Slavković, R., Dragićević, S., Popović, M., Milićević, I., Novaković, D., Industrijski prototip vedrice IPTR35037 za bager vedričar ERS 1000, Rezultat projekta Ministarstva za nauku i tehnološki razvoj, "Razvoj nove konstrukcije kašike bagera kontinualnog dejstva u cilju integrisanja modularnih reznih elemenata ", Broj projekta TR35037, Fakultet tehničkih nauka u Čačku, 2014.

Dučić, N., Ćojbašić, Ž., Radiša, R., Slavković, R., Manasijević, S., Milićević, I., Dragićević, S.,  Popović, M.: Unapređenje tehnologije livenja nosača zuba bagera vedričara, razvijen u okviru projekata TR35037 i TR35015, Fakultet tehničkih nauka Čačak, Mašinski fakultet Niš, Institut LOLA, 2015.

Dučić, N., Ćojbašić, Ž.,  Manasijević, S., Radiša, R., Slavković, R., Baralić, J., Milićević, I., Božić, M.: Inteligentni sistem za automatsko  upravlјanje punjenja kalupa metalom, razvijen u okviru projekata TR35037 i TR35015, Fakultet tehničkih nauka Čačak, Mašinski fakultet Niš, Institut LOLA, 2016.